44 research outputs found

    Combining Harmonic Generation and Laser Chirping to Achieve High Spectral Density in Compton Sources

    Get PDF
    Recently various laser-chirping schemes have been investigated with the goal of reducing or eliminating ponderomotive line broadening in Compton or Thomson scattering occurring at high laser intensities. As a next level of detail in the spectrum calculations, we have calculated the line smoothing and broadening expected due to incident beam energy spread within a one-dimensional plane wave model for the incident laser pulse, both for compensated (chirped) and unchirped cases. The scattered compensated distributions are treatable analytically within three models for the envelope of the incident laser pulses: Gaussian, Lorentzian, or hyperbolic secant. We use the new results to demonstrate that the laser chirping in Compton sources at high laser intensities: (i) enables the use of higher order harmonics, thereby reducing the required electron beam energies; and (ii) increases the photon yield in a small frequency band beyond that possible with the fundamental without chirping. This combination of chirping and higher harmonics can lead to substantial savings in the design, construction and operational costs of the new Compton sources. This is of particular importance to the the widely popular laser-plasma accelerator based Compton sources, as the improvement in their beam quality enters the regime where chirping is most effective.Comment: 5 pages, 4 figure

    Comment on Controlling the Spectral Shape of Nonlinear Thomson Scattering With Proper Laser Chirping

    Get PDF
    Rykovanov, Geddes, Schroeder, Esarey and Leemans [Phys. Rev. Accel. Beams 19, 030701 (2016); hereafter RGSEL] have recently reported on the analytic derivation for the laser pulse frequency modulation (chirping) which controls spectrum broadening for high laser pulse intensities. We demonstrate here that their results are the same as the exact solutions reported in Terzic, Deitrick, Hofler and Krafft [Phys. Rev. Lett. 112, 074801 (2014); hereafter TDHK]. While the two papers deal with circularly and linearly polarized laser pulses, respectively, the difference in expressions for the two is just the usual factor of 1/2 present from going from circular to linear polarization. In addition, we note the authors used an approximation to the number of subsidiary peaks in the unchirped spectrum when a better solution is given in TDHK

    Design of Electron and Ion Crabbing Cavities For an Electron-Ion Collider

    Get PDF
    Beyond the 12 GeV upgrade at the Jefferson Lab a Medium Energy Electron-Ion Collider (MEIC) is being considered. In order to achieve the desired high luminosities at the Interaction Points (IP), the use of crabbing cavities is under study. In this work, we will present up to date designs of superconducting cavities, considered for crabbing both ion and electron bunches. A discussion of properties such as peak surface fields and Higher Order Modes (HOMs) separation will be presented

    Modeling a Nb\u3csub\u3e3\u3c/sub\u3eSn Cryounit in GPT at UITF

    Get PDF
    Nb3Sn is a prospective material for future superconducting radio frequency (SRF) accelerator cavities. Compared to conventional niobium, the material can achieve higher quality factors, higher temperature operation, and potentially higher accelerating gradients (Eacc ≈ 96 MV/m). In this work, we performed modeling of the Upgraded Injector Test Facility (UITF) at Jefferson Lab utilizing newly constructed Nb3Sn cavities. We studied the effects of the buncher cavity and varied the gun voltage from 200-500 keV. We have calibrated and optimized the SRF cavity gradients and phases for the Nb3Sn five-cell cavities\u27 energy gains with the framework of the General Particle Tracer (GPT). Our calculations show the beam goes cleanly through the unit. There is full energy gain out of the second SRF cavity but not from the first SRF cavity due to non-relativistic phase shifts

    Emittance in Nonlinear Thomson Scattering

    Get PDF
    Inverse Compton scattering sources are finding increasing use as intense sources of high-energy photons. When operated at high field strength, ponderomotive detuning of the scattered emission can lead to decreased source performance. Up to now, the calculations of spectra for such nonlinear Thomson scattering have been done assuming a perfectly aligned electron interacts with the incident laser beam and several authors have investigated whether pondermotive detuning may be mitigated or cured by suitable incident laser chirping prescriptions. In order to determine if these chirping prescriptions are suitable in real beams with nonzero emittance, it is necessary to include misaligned boundary conditions in the electron motion and calculate the resulting spectra from the exact motion. In this paper we provide the exact solution for the electron equations of motion in the case of a misaligned electron passing through a laser pulse of high field strength. This solution is then used to calculate the scattered radiation distribution and we determine the emittance limits for the simplest chirping prescription

    Scattered Spectra from Inverse Compton Sources Operating at High Laser Fields and High Electron Energies

    Get PDF
    As Compton x-ray and gamma-ray sources become more prevalent, to understand their performance in a precise way, it becomes important to be able to compute the distribution of scattered photons precisely. For example, codes have been developed at Old Dominion University which were used to understand the performance of the Dresden Compton Source in detail. An ideal model would (i) include the full Compton effect frequency relations between incident and scattered photons, (ii) allow the field strength to be large enough that nonlinear effects are captured, and (iii) allow the effects of electron beam emittance to be introduced and studied. Various authors have considered various pieces of this problem, but until now, no analytical or numerical procedure is known to us that captures these three effects simultaneously. Here we present a model for spectrum calculations which simultaneously cover these aspects. The model is compared to a published full quantum mechanical calculation and found to agree for a case where both full Compton effect and nonlinear field strength are present. We use this model to investigate chirping prescriptions to mitigate ponderomotive broadening

    Electron-Ion Collider Performance Studies With Beam Synchronization via Gear-Change

    Get PDF
    Beam synchronization of the future electron-ion collider (EIC) is studied with introducing different bunch numbers in the two colliding beams. This allows non-pairwise collisions between the bunches of the two beams and is known as gear-change , whereby one bunch of the first beam collides with all other bunches of the second beam, one at a time. Here we report on the study of how the beam dynamics of the Jefferson Lab Electron Ion collider concept is affected by the gear change. For this study, we use the new GPU-based code (GHOST). It features symplectic one-turn maps for particle tracking and Bassetti-Erskine approach for beam-beam interactions

    Narrow-Band Emission in Thomson Sources Operating in the High-Field Regime

    Get PDF
    We present a novel and quite general analysis of the interaction of a high-field chirped laser pulse and a relativistic electron, in which exquisite control of the spectral brilliance of the up-shifted Thomson-scattered photon is shown to be possible. Normally, when Thomson scattering occurs at high field strengths, there is ponderomotive line broadening in the scattered radiation. This effect makes the bandwidth too large for some applications and reduces the spectral brilliance. We show that such broadening can be corrected and eliminated by suitable frequency modulation of the incident laser pulse. Furthermore, we suggest a practical realization of this compensation idea in terms of a chirped-beam-driven free electron laser oscillator configuration and show that significant compensation can occur, even with the imperfect matching to be expected in these conditions

    Laser Chirping in Inverse Compton Sources at High Electron Beam Energies and High Laser Intensities

    Get PDF
    The onset of nonlinear effects, such as ponderomotive broadening, increases the radiation bandwidth and thereby places a stringent limitation on the laser intensity used in inverse Compton sources. Recently, we have shown that a judicious longitudinal laser frequency modulation ( chirping ) can perfectly compensate for this ponderomotive broadening and restore the narrow band property of scattered radiation in the Thomson regime, when electron recoil during the collision with the laser can be neglected. Consequently, using QED, the laser chirping has been extended to the Compton regime, where electron recoil is properly accounted for. Here we present a new, semiclassical model for computation of scattered spectra in the Compton regime. We also derive a comprehensive generalization of the expressions for chirping prescription for linearly polarized laser pulses in 1D plane-wave approximation with arbitrary shapes and arbitrary scattering angle in the Compton regime. We use these new expressions to show that the higher-order harmonics in sources with high laser fields and high electron beam energies (nonlinear Compton regime) will be nonlinearly redshifted when compared to those with lower beam energies (Thomson regime). The chirping prescription will act to correct ponderomotive broadening in very high harmonics

    Compact SRF Linac for High Brilliance Inverse Compton Scattering Light Source

    Get PDF
    New designs for compact SRF linacs can produce micron-size electron beams. These can can be used for inverse Compton scattering light sources of exceptional flux and brilliance
    corecore